LLooaaddiinngg PPaappeerr iinn TTrraayy 66
The control panel displays a warning message when the paper in the tray is in short supply, or when
the tray is empty.
To change the paper size in Tray 6, refer to Configuring Tray 6.
To load paper in Tray 6:
1. At the high capacity feeder, squeeze the handle, and pull out Tray 6 until it stops.
2. Open the side gate, then wait for the tray to lower and stop.
3. The control panel displays the paper tray settings. Ensure that you load the correct paper type
into the tray.
Note: Do not load custom-size paper into Tray 6.
4. Before you load the paper into the trays, fan the edges of the paper. The procedure separates
any sheets of paper that are stuck together and reduces the possibility of paper jams.
Note: To avoid paper jams and misfeeds, do not remove paper from the packaging until
necessary.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
199
Paper and Media
To Next Page
Loading...
Need help?
General
