Moving the Printer
• Always power off the printer and wait for the printer to shut down. To power off the printer, verify
that there are no jobs in the queue, then press the secondary power switch. After the touch screen
goes dark, wait 10 seconds, then power off the main power switch. For details, refer to Power
Options.
• Disconnect the power cord from the back of the printer.
• To avoid spilling toner, keep the printer level.
Note: When moving the printer over a long distance, to prevent toner from spilling, remove the
drum cartridges and toner cartridges. Pack the printer inside a box.
Caution: Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Warranty or Service Agreement. The Xerox
®
Warranty or Service
Agreement do not cover damage to the printer caused by improper moving.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
265
Maintenance
To Next Page
Loading...
Need help?
General
