5. Adjust the Bypass Tray width guides until they touch the edges of the paper.
6. At the control panel, select the correct paper size, type, and color.
a. To define the paper size, touch Size, then touch Custom. In the Custom Paper Size window,
enter the width and length of the banner paper, then touch OK.
b. To define the paper type, touch Type, then select the correct paper type.
c. To define the paper color, touch Color, then select the correct paper color.
7. To confirm the settings, touch Confirm.
8. To return to the Home screen, press the Home button.
GGlloossssyy MMeeddiiaa
You can print glossy paper, up to 300 g/m
2
, from any tray. For Tray 5 and Tray 6, load the paper with
the glossy side or print side down, for Trays 1–4, load the paper with the glossy side or print side up.
Note: For best results, load Glossy Cardstock, and Glossy Cardstock Reloaded paper into Tray 5.
GGuuiiddeelliinneess ffoorr PPrriinnttiinngg oonn GGlloossssyy PPaappeerr
• Do not open sealed packages of glossy paper until you are ready to load them into the printer.
• Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until
ready to use.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper that you are planning to use. Do not leave glossy paper in
the tray when you are finished printing. Reinsert unused paper in the original wrapper and seal.
• Rotate paper frequently. Long periods of storage in extreme conditions can cause glossy paper to
curl and jam in the printer.
• In the print driver software, select the desired glossy paper type or select the tray loaded with the
desired paper.
LLooaaddiinngg GGlloossss PPaappeerr iinn TTrraayy 55
1. Before you load glossy paper, remove all other paper from the tray.
2. Load only the amount of paper you plan to use.
3. Load the paper with the glossy side or print side down.
4. At the control panel, select the correct paper size, type, and color:
• Ensure that the paper type is set to Glossy. To select a new paper type, touch Type.
• To select a new paper size, touch Size.
• To select a new paper color, touch Color.
5. To confirm the settings, touch Confirm.
TTrraannssppaarreenncciieess
Transparencies can be printed from trays 1–5. For best results, use only recommended Xerox
®
transparencies.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
211
Paper and Media
To Next Page
Loading...
Need help?
General
