Xerox AltaLink B8155 User Manual

5. To enable Xerox Print Service, touch On.
6. Exit Settings.
Enabling NFC on the Mobile Device
Most mobile devices have NFC disabled by default.
To enable NFC:
1. Go to Settings.
2. Go to the NFC setting, then touch On.
3. Exit Settings.
UUssiinngg NNFFCC oonn yyoouurr PPrriinntteerr
The NFC chip is on the bottom right of the control panel. When NFC is enabled, the NFC icon is
lighted, and you can use the NFC function.
Refer to your mobile device user documentation for the mobile device NFC chip location.
Note: The NFC function must be enabled before use. For NFC enable instructions, refer to the
System Administrator Guide at www.xerox.com/office/ALB81XXdocs.
Mapping the Printer to your Mobile Device
1. Open the Xerox Print Service Plugin.
2. At the top right side of the screen, touch the selection button, then select Add Printer.
3. Touch the NFC option.
4. Hold the mobile device over the NFC icon on the control panel.
The mobile device and the printer communicate with each other. The mobile device searches the
network for the printer. When the printer is located, it is added to the list as a mapped printer.
You can submit print jobs from your mobile device to the printer.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
55
Getting Started

Xerox AltaLink B8155 Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Maximum Print Resolution	1200 x 2400 dpi
Automatic Document Feeder	Yes
Monthly Duty Cycle	Up to 300, 000 pages
Memory	4 GB
Control Panel	10.1-inch color touchscreen
Paper Output Capacity	500 sheets
Scan Resolution	Up to 600 x 600 dpi
Fax	Optional
Fax Compression	MH, MR, MMR, JBIG
Operating System Compatibility	Windows, Mac OS, Linux
Hard Drive	320 GB
Connectivity	Ethernet, USB
Media Sizes	A4, A5, B5, Legal, Letter, Executive
Duplex Printing	Automatic
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria
Print Speed	Up to 55 ppm