a. Load the original document for the first segment.
b. Select the options required for the segment.
c. Touch Scan.
7. Set the required build job display options.
8. Print a Sample segment or delete a segment.
a. To print a sample of the previous segment scanned, touch the segments option, then touch
Sample Last segment.
b. To delete the previous segment scanned, touch the segments option, then touch Delete Last
Segment.
c. To delete all the previous segment scanned, touch the segments option, then touch Delete
All Segments.
9. Program and scan more segments.
a. Load the originals for the next segment.
b. To change the settings for the next segment, touch Program Next Segment, then select the
options required for the segment.
c. Touch Scan Next Segment.
10. Continue scanning segments until all original documents are scanned.
11. Touch Submit.
PPrriinnttiinngg aa SSaammppllee JJoobb
Sample Job allows you to print a test copy of a job to inspect before printing multiple copies. This
feature is useful for complex or high-volume jobs. After you print and inspect the test copy, you can
choose to print or cancel the remaining copies.
To print a sample copy of your job:
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Adjust the copy settings as needed.
4. Enter the number of copies needed.
5. Touch the Sample Job toggle button.
6. Touch the Start button. The sample job prints.
7. Inspect the sample job, then select one of the following options:
• If the copy is unsatisfactory, touch Delete. Touch Delete to confirm. The job is canceled and
no more copies are printed.
• If the copy is satisfactory, touch Print. The remaining copies are printed.
8. To return to the home screen, press the Home button.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
99
Xerox® Apps
To Next Page
Loading...
Need help?
General
