PPaappeerr jjaamm iinn ddoooorr BB
1. Open door B.
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching it.
2. Remove the jammed paper from any of the following areas:
Note: Make sure that all paper fragments are removed.
• Fuser area
• Below the fuser area
• Duplex unit
3. Close the door.
PPaappeerr jjaamm iinn tthhee aauuttoommaattiicc ddooccuummeenntt
ffeeeeddeerr
1. Remove all original documents from the ADF tray.
2. Open the ADF cover.
3. Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
4. Close the ADF cover.
14
To Next Page
Loading...
Need help?
General
