CClleeaanniinngg tthhee SSccaannnneerr
1. Open the scanner cover.
2. Using a damp, soft, lint-free cloth, wipe the following areas:
a. ADF glass pad
Note: In some printer models, this location has an ADF glass
instead of a pad.
b. Scanner glass pad
c. ADF glass
d. Scanner glass
3. Close the scanner cover.
LLooaaddiinngg tthhee ttrraayy
CAUTION—TIPPING HAZARD: To reduce the risk of
equipment instability, keep the tray closed until needed.
1. Remove the tray.
Note: To avoid paper jams, do not remove the tray while the
printer is busy.
2. Flex, fan, and align the paper edges before loading.
8
To Next Page
Loading...
Need help?
General
