Replacing Staples in the Booklet Maker of the Office Finisher
WARNING: Do not perform this procedure while the printer is printing.
1. Open the finisher side cover.
2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and slide the panels to the center.
3. Hold the tabs on both sides of the staple cartridge and pull the cartridge out of the finisher.
260
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
