5. To remove the staple pack from the staple cartridge, press in the green tabs and pull back the
handle, then lift out the staple pack.
Note: If you do not see the staple jam, remove the staple case.
6. To remove the staple case, press the rear of the case as shown. Remove the jammed staples, then
return the staple case to the original position.
Note: If you cannot see the staple jam, open the staple cartridge clamp.
7. To open the staple cartridge clamp, pull the clamp firmly in the direction shown.
WARNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
328
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
Troubleshooting