5. To access the second-side scanning lens assembly, on the left side of the document cover, lower
the lever. Remove the original document in the direction shown.
6. If the original document is not visible when the document feeder is opened, close the document
feeder. Lift the document feeder tray, then remove the jammed paper.
7. Lower the document feeder tray.
8. If the original document is not wrinkled or torn, load document into the feeder again, following
the instructions on the control panel.
Note: After clearing a document-feeder jam, reload the entire document, including the pages
that are scanned already. The printer skips the scanned pages automatically, then scans the
remaining pages.
Caution: Torn, wrinkled, or folded original documents can cause jams and damage the printer.
To copy torn, wrinkled, or folded original documents, use the document glass.
Xerox
®
AltaLink
®
C81XX Series Color Multifunction Printer
User Guide
287
Troubleshooting
To Next Page
Loading...
Need help?
General
