How to fix uneven print quality on Xerox All in One Printer?
To fix uneven print quality on your Xerox All in One Printer, try replacing the drum cartridge. If the screen displays a message for replacement, replace the toner cartridge as well.
How to fix paper stacking issues in Xerox All in One Printer?
If paper delivered to an output tray is not properly stacked up on your Xerox All in One Printer, try flipping over the paper stack in the paper tray, or rotate it head to toe.
How to adjust print darkness on Xerox All in One Printer?
If the output from your Xerox All in One Printer is too light or too dark, try loading fresh paper and check the quality of the original document. You can also select the Lighten/Darken option on the touch screen. Run off more prints to see if the copy quality improves. If the issue persists, consider replacing the drum cartridge.
What to do if my Xerox All in One Printer output does not reflect the selections made on the touch screen?
If the output from your Xerox All in One Printer does not reflect the selections made on the touch screen, select [Save] after each selection on the touch screen, if one exists.
How to fix Xerox All in One Printer that will not power on?
If your Xerox All in One Printer won't power on, please check the following: * Ensure the power cord is properly connected. * Verify the power switch is in the ON position. * Make sure the RESET button on the back of the machine is not tripped (popped up); push it to reset. * Confirm the AC outlet is supplying voltage by connecting another appliance.
What to do if my Xerox All in One Printer does not accept documents into memory?
If your Xerox All in One Printer does not accept documents into memory: * Check with the Key Operator about available memory. * If the memory is almost full, print and delete unnecessary files.
What to do if my Xerox All in One Printer is producing ghosting?
If your Xerox All in One Printer is producing ghosting: * Check the quality of the documents. * If transparencies are used, select [Transparency] in [Paper Type]. The machine automatically adjusts the quality for transparencies. * Feed the document SEF. * Replace the drum cartridge.
What to do if I cannot store a document for secure polling on my Xerox All in One Printer due to full memory?
If you cannot store a document for secure polling on your Xerox All in One Printer due to full memory, cancel the operation and try again later when additional memory is available.
What to do if my Xerox All in One Printer displays a memory full error message?
If your Xerox All in One Printer displays a memory full error message: * Check with the Key Operator about available memory. * Divide the remaining pages of the job into several small jobs and run the job again.
What to do if Xerox All in One Printer cannot store document due to full memory?
If you cannot store a document for secure polling on your Xerox All in One Printer due to full memory, cancel the operation and try again later when additional memory is available.
General| Brand | Xerox |
|---|---|
| Model | CopyCentre C123 |
| Category | All in One Printer |
| Language | English |
To Next Page