Xerox DocuColor 252

Step 5: Printing from a Macintosh or Windows Computer 11
English (EN)
English (EN)
10. Select the following options:
• Protocol: LPR
• LPR Settings:
• Queue Name: type the exact name of the network printer to
which you want to print—for example,
CX2601_ProcessPrint
• LPR Byte Counting Enabled: selected.
11. Click OK, Next and then Finish.
12. Click Close in the Printer Ports window.
13. Click Close in the Printer Server Properties window.
The next step is to setup the TCP/IP port for printing using the Adobe
Printer Driver.
Setting Up an LPR Printer in Windows 2000/2000 Pro/2003/XP
Before you begin, make sure that LPR is installed on your on the
Windows 2000, 2000 Pro, XP and 2003 computer.
Installing LPR on Your Computer
1. Click Start and select Settings > Control Panel (Windows XP) or
Control Panel (Windows 2000, 2000 Pro, XP and 2003).
2. Select Add/Remove Windows Components.
3. Locate the Other Network and Print Services check box.
• If this check box is selected, proceed to Setting up an LPR Printer
on page 12.
• If this check box is not selected, proceed to the next step 4.
4. Select the Other Network and Print Services check box, and click
Next.
5. Click Browse and locate the desired Windows installation files, either
on your hard disk, in the
I386 folder, or on your Windows installation
CD.
6. Click Finish.