152 6 Troubleshooting
UnknownPaperType
Press SET
and Cancel JOB
The printer was requested by the job to automatically select a paper tray when the
[Paper Priority] setting for all paper types are set to [Off].
Cancel the print job by pressing the <Eject/Set> button on the control panel.
Set the priority order of the paper trays or manually select a paper tray on the control
panel.
Refer to
• "[System Settings]" (P. 116)
Wrong paper size
Reload Bypass
The paper size loaded in the bypass tray does not match the paper size set on the
print driver or on the control panel.
Load paper of the size set on the print driver or on the control panel.
Refer to
• "Loading Paper in the Bypass Tray" (P. 83)
Wrong paper size
Reload Tray N
Or check Dial
(N: tray 1 - 4)
The paper size loaded in the tray N does not match the paper size set with the paper
size dial.
Pull out the tray N, check the paper size and the paper size dial, and insert the tray.
To start printing, press the <Eject/Set> button on the control panel.
Refer to
• "Loading Paper in the Trays 1 - 4" (P. 85)
Wrong password
Press SET
and Cancel JOB
The password of the PDF file and that set on the printer do not match.
Cancel the job by pressing the <Eject/Set> button on the control panel.
Set the correct password on the control panel and try printing again.
Refer to
• "[PDF]" (P. 98)
Message Symptom/Cause/Remedy
To Next Page
Loading...
Need help?
General