A.8 Installing the KR Font Kit 223
10. Re-attach the metal plate cover on the
printer by tightening the three screws
loosened in Step 4.
11. Re-attach the rear cover on the printer by
tightening the two screws removed in Step
2.
12. Plug in the power cord and switch on the power by pressing the power switch to the
<|> position.
The installation is now complete.
Note
• You can check whether the KR font kit has been installed correctly by printing out the [PCL Font List].
For information on how to print the [PCL Font List], refer to "7.2 Printing the Reports/Lists" (P. 164).
To Next Page
Loading...
Need help?
General