170 7 Maintenance
4. Remove any paper in the bypass tray.
Keep the paper wrapped and away from
humidity and dirt.
5. Pull out the paper tray from the printer and
remove any paper in the tray. Keep the
paper wrapped and away from humidity
and dirt.
6. Lift the printer and move it gently. If the
printer is to be moved over a long distance,
pack it inside a box.
7. After transporting the printer, adjust the color registration before using it.
Refer to
• For information on how to adjust the color registration, refer to "7.9 Adjusting the Color Registration" (P.
162).
To Next Page
Loading...
Need help?
General