Xerox Nuvera 120 MX Operator's Manual

Xerox Production Stacker 6-1
Operator Manual
6
6 Troubleshooting
Problem Cause Solution
Does not run when top
cover or door is closed.
No power
• Check that the power cord is connected to the
wall outlet
• Check if printer is ready
• Check communication cable from Xerox
Nuvera Product line printer to stacker for
proper connection
• Check for other area if the mimic not
illuminated
• Check the service switch position (Refer to
Warning Pictograms Location in the
Introduction)
Poor registration
High paper curl
• Adjust printer decurler
• Flip paper in printer paper tray
Mechanical obstruction
• Check for obstruction in the stacker paper path
• Ensure that all transports and baffles are
properly seated
Paper Jams
High paper curl
• Adjust printer decurler
• Flip paper in printer paper tray(s)
• Switch to heavier weight paper

Xerox Nuvera 120 MX Specifications

General

Brand	Xerox
Model	Nuvera 120 MX
Category	Office Equipment
Language	English