S
ETTING
U
P
Y
OUR
P
RINTER
2.15
2
Reinstalling Printer software
Reinstall is required if your installation fails.
1
From the Start menu, select Programs.
2
Select Xerox Phaser 3116, and then Xerox Phaser 3116
Driver Maintenence .
3
The Xerox Phaser 3116 Driver Maintenance window
appears. Click Repair and then click Next.
4
When reinstallation is done, click Finish.
Removing Printer software
1
From the Start menu, select Programs.
2
Select Xerox Phaser 3116, and then Xerox Phaser 3116
Driver Maintenence .
3
The Xerox Phaser 3116 Driver Maintenance window
appears. Check Remove and then click Next.
4
When you are asked to confirm your selection, click OK.
The Xerox Phaser 3116 printer driver and all of its
components are removed from your computer.
5
When removing is completed, click Finish.
To Next Page
Loading...
