Xerox Phaser 3400 Reference Guide

Reference Guide 17
Material Safety Data Sheet
Section IV - Physical Data
Section V - Fire and Explosion Data
Section VI -Reactivity Data
Section VII - Special Protection Information
Appearance/Odor: black powder/ faint odor
Softening Range: 43.3 to 60.0 degrees C (110 to 140 degrees F)
Boiling Point: N.A.
Melting Point: N.A.
Solubility in Water: insoluble
Specific Gravity (H
2
O=1): ~3.5
Evaporation Rate: N.A.
Vapor Pressure (mm Hg): N.A.
Vapor Density (Air=1): N.A.
pH: N.A.
Volatile: N.D.% (Wt.) N.D. % (Vol.)
Flash Point (Method Used): N.A.
Flammable Limits: LEL: N.A., UEL: N.A.
NFPA 704: Health – 0, Fire –1, Reactivity - 0
Extinguishing Media: Water spray, foam, dry powder.
Special Fire Fighting Procedures: Avoid inhalation of smoke. Wear protective clothing
and self-contained breathing apparatus.
Fire and Explosion Hazards: Toner is a combustible powder. Like most organic
materials in powder form, it can form explosive
mixtures when dispersed in air.
Stability: Stable
Hazardous Polymerization: Will not occur.
Hazardous Decomposition Products: CO, CO
2
and other toxic products of combustion.
Avoid breathing smoke.
Incompatibility (Materials to Avoid): None known.
Respiratory Protection: None required when used as intended in Xerox equipment.
Eye Protection: None required when used as intended in Xerox equipment.
Protective Gloves: None required when used as intended in Xerox equipment.
Other: For use other than normal customer - operating procedures (such
as in bulk toner processing facilities), goggles and respirators may
be required. For more information, contact Xerox.

Xerox Phaser 3400 Specifications

General

Brand	Xerox
Model	Phaser 3400
Category	Printer
Language	English