What does 'LSU Motor Error Error Cycle Power' mean on Xerox PHASER 3435 Printer?
If your Xerox printer displays 'LSU Motor Error Cycle Power', it indicates a problem within the LSU (Laser Scanning Unit). Try unplugging the power cord and plugging it back in.
Why does my Xerox PHASER 3435 keep jamming paper?
If your Xerox printer frequently jams, it might be due to several reasons. Firstly, check if the paper tray is overloaded and remove any excess paper. Ensure that you are using paper that meets the printer's specifications; for special materials, use the multi-purpose tray. If you're printing on thick paper, use the rear cover (face-up) instead of the output tray (face-down). Finally, inspect the inside of the printer for any debris and remove it.
Why is my Xerox PHASER 3435 printing blank pages?
If your Xerox printer is producing blank pages, the print cartridge may be defective or empty. Try redistributing the toner in the print cartridge. If the problem continues, replace the print cartridge. Also, verify that the file you are printing does not contain blank pages. If these steps do not resolve the issue, some parts, such as the controller or the board, may be defective.
What to do if my Xerox PHASER 3435 Printer says 'Toner Low Replace Toner'?
When the 'Toner Low Replace Toner' message appears on your Xerox printer, it means the toner in the cartridge is running low. To resolve this, install a new Xerox-genuine print cartridge. You can continue printing, but the print quality may decrease, and product support will no longer be provided.
What does it mean when my Xerox Printer says 'Replace Toner'?
If your Xerox printer displays a 'Replace Toner' message, the toner in the cartridge has run out. Install a new Xerox-genuine print cartridge to continue printing. Note that continuing to print without replacing the toner may result in reduced print quality, and product support will no longer be available.
What does 'Over Heat Error Cycle Power' mean on my Xerox PHASER 3435 Printer?
If your Xerox printer displays an 'Over Heat Error Cycle Power' message, it means there's a problem in the fuser unit. Try unplugging the power cord and plugging it back in to resolve the issue.
What does 'Low Heat Error Cycle Power' mean on my Xerox Printer?
If your Xerox printer displays a 'Low Heat Error Cycle Power' message, it indicates a problem in the fuser unit. Unplug the power cord, plug it back in, and turn the printer back on.
What does 'Open Heat Error Cycle Power' mean on my Xerox Printer?
If your Xerox printer displays an 'Open Heat Error Cycle Power' message, this indicates a problem with the fuser unit. To attempt a fix, unplug the power cord and plug it back in.
What to do if my Xerox PHASER 3435 Printer says 'Tray 2 Paper Empty'?
If your Xerox printer displays 'Tray 2 Paper Empty', load paper into the optional tray 2.
What to do if my Xerox PHASER 3435 Printer says 'Duplex Jam 1 Open/Close Door'?
If your Xerox printer displays 'Duplex Jam 1 Open/Close Door', clear the jam.
General| Color | No |
|---|---|
| Maximum resolution | 600 x 600 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 33 ppm |
| Internal memory | 64 MB |
| Sound power level (standby) | 25 dB |
| Total input capacity | 300 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 550 sheets |
| Media weight (tray 1) | 60 - 163 gsm |
| Paper tray media types | Envelopes |
| Non-ISO print media sizes | Executive (184 x 267mm), index card, Letter (media size), Legal (media size) |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Network ready | Yes |
| Authentication method | IP filtering, 802.1x |
| Power consumption (active) | 526 W |
| Maximum operating temperature range (T-T) | 10 - 32 °C |
| Maximum duty cycle | 80000 pages per month |
| Power consumption (standby) | 36 W |
| Power consumption (PowerSave) | 11 W |
| Operating temperature (T-T) | 50 - 90 °F |
| Operating relative humidity (H-H) | 20 - 80 % |
| Certification | CB Report (IEC 60950-1/EN 60950-1), Certified to UL 60950-1/CSA 60950-1-03, 1st Edition, CE Marked, EMC Directive 2004/108/EC, FCC Part 15, Class B, Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2002/95/EC |
Highlights printer's advanced capabilities and print quality enhancements.
Illustrates and labels the front components of the printer.
Explains the functions of the printer's control panel buttons and display.
Explains the meaning of different Status LED colors and blinking patterns.
Provides recommendations for optimal printer placement and clearance space.
Step-by-step guide on accessing and navigating printer settings via the control panel.
Lists the main configuration menus available on the printer's control panel.
Details printer information pages and layout options for print output.
Configures paper source, size, type, and tray chaining for printing.
Adjusts print quality settings like resolution, darkness, language, and power save.
Configures printer language emulation (PCL, PostScript, EPSON).
Configures network interface, TCP/IP, EtherTalk, and security settings.
Guides on printing demo pages, changing display language, and using toner save mode.
Details the software included on the CD-ROM for printer operation.
Lists the necessary hardware and software specifications for installation.
Explains connecting the printer to a network and supported environments.
Guides on setting up TCP/IP, EtherTalk, Ethernet speed, and 802.1x security.
How to print network configuration and enable the CentreWare IS web server.
Discusses choosing appropriate print media and factors affecting print quality.
Lists the various paper types and sizes supported by the printer.
Provides specific instructions for printing on envelopes, labels, and transparencies.
Step-by-step instructions for loading paper into the printer's main trays.
Detailed guidance on loading various media types into the multi-purpose tray.
Explains how to choose between the rear cover and output tray for printed pages.
General steps for printing documents from various applications.
Procedures for deleting print jobs from the print queue.
Information on available print cartridges, optional trays, and memory DIMMs.
How to print pages for printer diagnostics and maintenance.
Methods for cleaning the printer's interior and exterior to maintain print quality.
Covers cartridge storage, toner saving, and checking toner levels.
Step-by-step instructions for replacing an empty print cartridge.
Lists parts that require periodic replacement and their yield.
Detailed instructions for clearing paper jams from various printer locations.
Explains error messages and their corresponding suggested solutions.
Lists and explains messages related to print cartridge status and replacement.
Addresses common issues like printer not printing or slow print jobs.
Helps diagnose and fix issues affecting print quality, such as faded print or smearing.
Troubleshooting tips for Windows, Linux, and Macintosh operating systems.
Procedures and precautions for installing a memory DIMM to expand printer capacity.
How to configure the installed memory in the PostScript printer driver settings.
Comprehensive list of the printer's technical details, including speed, memory, and dimensions.
To Next Page
