Xerox PHASER 3435 User Manual

2.4 < System setup>
Graphic menu
Use the Graphic menu to change settings affecting the quality of the
printed characters and images.
Item Explanation
Resolution
Specify the number of dots printed per inch (dpi).
The higher the setting, the sharper printed
characters and graphics.
• If your print jobs are mostly text, select 600dpi-
Normal for the highest quality printing.
•Select 1200dpi-Best when your job contains
bitmapped images, such as scanned photos or
some graphics, that will benefit from enhanced
line screening.
Darkness
You can lighten or darken the print on the page by
changing the toner density setting. The Plain
setting usually produces the best result. Use the
Light toner density setting to save toner.
Values: 600dpi-Normal, 1200dpi-Best
Values: Plain, Light, Dark
System Setup menu
Use the System Setup menu to configure a variety of printer features.
Item Explanation
Language
This setting determines the language of the text
that appears on the control panel display and
information printing.
Power Save
When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long
the printer waits before going to power save
mode.
Auto Continue
This item determines whether or not the printer
continues printing when it detects the paper is
mismatched with your paper setting.
• Off: If a paper mismatch occurs, the message
will remain on the display and the printer will
remain off-line until you insert the correct
paper.
• On: If a paper mismatch occurs, an error
message will display. The printer will go
offline for 30 seconds, then automatically
clear the message and continue printing.
Altitude Adj.
You can optimize print quality according to your
altitude.
Auto CR
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
Values: English, FRANCAIS, Espanol,
Portugues B., Deutsch, Italiano...
Values: [ 5 ] Min, [ 10 ] Min, [ 15 ] Min, [ 20 ]
Min, [ 30 ] Min, [ 60 ] Min, [ 120 ] Min
Values: Off, On
Values: Plain, High1, High2, High3
Values: LF, LF+CR
LF LF+CR
AA
BB
CC
AA
BB
CC

Xerox PHASER 3435 Specifications

General

Color	No
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Internal memory	64 MB
Sound power level (standby)	25 dB
Total input capacity	300 sheets
Total output capacity	150 sheets
Maximum input capacity	550 sheets
Media weight (tray 1)	60 - 163 gsm
Paper tray media types	Envelopes
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size), Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Network ready	Yes
Authentication method	IP filtering, 802.1x
Power consumption (active)	526 W
Maximum operating temperature range (T-T)	10 - 32 °C
Maximum duty cycle	80000 pages per month
Power consumption (standby)	36 W
Power consumption (PowerSave)	11 W
Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	20 - 80 %
Certification	CB Report (IEC 60950-1/EN 60950-1), Certified to UL 60950-1/CSA 60950-1-03, 1st Edition, CE Marked, EMC Directive 2004/108/EC, FCC Part 15, Class B, Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2002/95/EC