Xerox PHASER 3435 User Manual

Advanced Printing
20
Printing on Both Sides of Paper
You can print on both sides of a sheet of paper. Before printing,
decide how you want your document oriented.
The options are:
• Printer Setting , if you select this option, this feature is
determined by the setting you’ve made on the control
panel of the printer.
•
None
• Long Edge , which is the conventional layout used in
book binding.
•
Short Edge , which is the type often used with calendars.
•
Reverse Duplex , allows you to select general print
order compare to duplex print order.
N OTE :
• Do not print on both sides of labels, transparencies,
envelopes, or thick paper. Paper jamming and damage to the
printer may result.
• To use double-sided printing, you can use only the following
paper sizes: A4, Letter, Legal, Oficio and Folio, with a weight
of 20~24 lbs (75~90 g/m ² ).
1 To change the print settings from your software
application, access printer properties. "Printing a
Document" on page 12.
2 From the Layout tab, select the paper orientation.
3 From the Double-sided Printing section, select the
binding option you want.
4 Click the Paper tab and select the paper source, size, and
type.
5 Click OK and print the document.
Long Edge
s
Short Edge s
25
3
2
5
3
2
5
3
2
5
3
Printing a Reduced or Enlarged
Document
You can change the size of a page’s content to appear larger or
smaller on the printed page.
1 To change the print settings from your software
application, access printer properties. See "Printing a
Document" on page 12.
2 From the Paper tab, select Reduce/Enlarge in the
Printing Type drop-down list.
3 Enter the scaling rate in the Percentage input box.
You can also click the or button.
4 Select the paper source, size, and type in Paper Options .
5 Click OK and print the document.
Fitting Your Document to a
Selected Paper Size
This printer feature allows you to scale your print job to any
selected paper size regardless of the digital document size. This
can be useful when you want to check fine details on a small
document.
1 To change the print settings from your software
application, access printer properties. See "Printing a
Document" on page 12.
2 From the Paper tab, select Fit to Page in the Printing
Type
drop-down list.
3 Select the correct size from the Output size drop-down
list.
4 Select the paper source, size, and type in Paper Options .
5 Click OK and print the document.
A

Xerox PHASER 3435 Specifications

General

Color	No
Maximum resolution	600 x 600 DPI
Time to first page (black, normal)	8.5 s
Print speed (black, normal quality, A4/US Letter)	33 ppm
Internal memory	64 MB
Sound power level (standby)	25 dB
Total input capacity	300 sheets
Total output capacity	150 sheets
Maximum input capacity	550 sheets
Media weight (tray 1)	60 - 163 gsm
Paper tray media types	Envelopes
Non-ISO print media sizes	Executive (184 x 267mm), index card, Letter (media size), Legal (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Network ready	Yes
Authentication method	IP filtering, 802.1x
Power consumption (active)	526 W
Maximum operating temperature range (T-T)	10 - 32 °C
Maximum duty cycle	80000 pages per month
Power consumption (standby)	36 W
Power consumption (PowerSave)	11 W
Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	20 - 80 %
Certification	CB Report (IEC 60950-1/EN 60950-1), Certified to UL 60950-1/CSA 60950-1-03, 1st Edition, CE Marked, EMC Directive 2004/108/EC, FCC Part 15, Class B, Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2002/95/EC