Xerox PHASER 3435 - Control Panel Overview

1.3 < Introduction>
Rear view
1
control board cover
6
duplex unit
2
network port
7
power receptacle
3
USB port
8
power switch
4
parallel port
9
rear cover
5
optional tray 2 cable
connector
* The figure above shows an Phaser 3435/DN
with all available options.
Control panel overview
1
Start/Stop: Cancels an operation at any time; resumes
printing.
2
Back: Sends you back to the upper menu level.
3
Status: Shows the status of your printer. See page 1.4.
4
Menu: Enters Menu mode and scrolls through the available
menus.
5
LCD: Displays the printer status, error messages and menus
in progress.
6
scroll: Scrolls through the options available in the selected
menu, and increases or decreases value.
7
OK: Confirms the selection on the display.
/