Xerox PHASER 3435 - Chapter 9 USING YOUR PRINTER with a MACINTOSH; Installing Printer Driver for Macintosh; Uninstalling the Printer Driver

Using Your Printer with a Macintosh
31
9 Using Your Printer with a
Macintosh
Your printer supports Macintosh systems with a built-in USB
interface or 10/100 Base-TX network interface card. When you
print a file from a Macintosh computer, you can use the driver by
installing the PPD file.
This chapter includes:
• Installing printer driver for Macintosh
• Setting Up the Printer
•Printing
Installing printer driver for
Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
1 Connect your machine to the computer using the USB
cable or the Ethernet cable.
2 Turn on your computer and the machine.
3 Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4 Double-click CD-ROM icon that appears on your
Macintosh desktop.
5 Double-click the MAC_Installer folder.
6 Double-click the MAC_Printer folder.
7 For Mac OS 10.3 or higher, double-click the Xerox
Phaser 3435_OSX
icon.
8 Enter the password and click OK .
9 Click Continue .
10 Select Easy Install and click Install .
11 After the installation is finished, click Quit .
Uninstalling the printer driver
1 Connect your machine to the computer using the USB
cable or the Ethernet cable.
2 Turn on your computer and the machine.
3 Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4 Double-click CD-ROM icon that appears on your
Macintosh desktop.
5 Double-click the MAC_Installer folder.
6 Double-click the MAC_Printer folder.
7 For Mac OS 10.3 or higher, double-click the Xerox
Phaser 3435_OSX
icon.
8 Select Uninstall and then click Uninstall .
9 Click Continue .
10 When the uninstallation is done, click Quit .