EasyManuals Logo
Home>Xerox>Printer>PHASER 3435

Xerox PHASER 3435 User Manual

Xerox PHASER 3435
98 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
5.6 <
Loading print media>
Notes
• Do not push the paper width guide far enough to cause the
material to warp.
• If you do not adjust the paper width guide, it may cause paper
jams.
Using the multi-purpose tray
The multi-purpose tray can hold special sizes and types of print material,
such as transparencies, postcards, note cards, and envelopes. It is
useful for single page printing on letterhead or colored paper.
To load paper in the multi-purpose tray:
1 Open the multi-purpose tray and unfold the multi-purpose tray
extension, as shown.
2 If you are using paper, flex or fan the edge of the paper stack to
separate the pages before loading.
For transparencies, hold them by the edges and avoid touching the
print side. Oils from your fingers can cause print quality problems.
3 Load the paper with the side to be printed on facing up.
Depending on the media type you are using, keep the following
loading guidelines:
• Envelopes: Flap side down and with the stamp area on the top left
side. If you need to do the printing job with a wrinkled envelopes,
open the rear cover, (see page 5.8.) Push the pressure lever on
each side down.
• Transparencies: Print side up and the top with the adhesive strip
entering the printer first.
• Labels: Print side up and top short edge entering the printer first.
• Preprinted paper: Design side up with the top edge toward the
printer.
• Card stock: Print side up and the short edge entering the printer
first.
• Previously printed paper: Previously printed side down with an
uncurled edge toward the printer.
Note
Make sure that you have not loaded too much print material.
The print material buckles if you load a stack that is too deep or
if you push it in too far.
1
pressure lever
1

Table of Contents

Other manuals for Xerox PHASER 3435

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox PHASER 3435 and is the answer not in the manual?

Xerox PHASER 3435 Specifications

General IconGeneral
ColorNo
Maximum resolution600 x 600 DPI
Time to first page (black, normal)8.5 s
Print speed (black, normal quality, A4/US Letter)33 ppm
Internal memory64 MB
Sound power level (standby)25 dB
Total input capacity300 sheets
Total output capacity150 sheets
Maximum input capacity550 sheets
Media weight (tray 1)60 - 163 gsm
Paper tray media typesEnvelopes
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size), Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Network readyYes
Authentication methodIP filtering, 802.1x
Power consumption (active)526 W
Maximum operating temperature range (T-T)10 - 32 °C
Maximum duty cycle80000 pages per month
Power consumption (standby)36 W
Power consumption (PowerSave)11 W
Operating temperature (T-T)50 - 90 °F
Operating relative humidity (H-H)20 - 80 %
CertificationCB Report (IEC 60950-1/EN 60950-1), Certified to UL 60950-1/CSA 60950-1-03, 1st Edition, CE Marked, EMC Directive 2004/108/EC, FCC Part 15, Class B, Low Voltage Directive 2006/95/EC, R&TTE Directive 1999/5/EC, RoHS Directive 2002/95/EC

Related product manuals