60. Install the drive gear, metal plate and two screws.
Make sure the tabs on the back of the black drive gear fit into the slots in the white drive gear.
61. Install the two screws into the left side end cap. 62. Install the two screws into the right side end cap.
XEROX PHASER 3600 • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2012 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com
To Next Page
Loading...
