How to solve problem if I can’t print the configuration page on Xerox Phaser 6120?
Check that at least Tray 1 is loaded with media, in place, and secure. Make sure the covers are closed securely. Clear any paper jams.
Why does my Xerox Phaser 6120 print pages continuously when collated is selected for multiple copies on a single sheet?
General| Color | Yes |
|---|---|
| Print technology | Laser |
| Time to first page (black, normal) | 13 s |
| Time to first page (color, normal) | 22 s |
| Print speed (black, normal quality, A4/US Letter) | 20 ppm |
| Print speed (color, normal quality, A4/US Letter) | 5 ppm |
| Internal memory | 128 MB |
| Processor model | 300 MHz, 32 bit RISC |
| Maximum print size | 210 x 297 mm |
| Maximum ISO A-series paper size | A4 |
| I/O ports | USB |
| Power requirements | 200 – 240 VAC / 100 – 127 VAC 50/60 Hz |
| Networking features | Ethernet/Fast-Ethernet |
| Non-operating relative humidity (non-condensing) | 10 - 85 % |
| Total input capacity | 200 sheets |
| Maximum input capacity | 500 sheets |
| Printer fonts | PostScript |
| Maximum duty cycle | 35000 pages per month |
| Number of PostScript fonts | 139 |
| Power consumption (printing) | 380 W |
| Storage temperature (T-T) | -20 - 40 °C |
| Operating temperature (T-T) | 10 - 32 °C |
| Operating relative humidity (H-H) | 10 - 80 % |
Weight and Dimensions| Dimensions (WxDxH) | 442 x 395 x 341 mm |
|---|
To Next Page