Phaser® 7300 Color Printer
Copyright © 2002 Xerox Corporation. All Rights Reserved. 22
Printer Features
Printing the Startup Page
By default the printer produces a Startup Page each time the printer is turned on or reset. You can
disable the automatic printing of the Startup Page as shown here and later print it from the Printable
Pages menu.
There are two methods for turning on/off the Startup Page:
■ Adjust from the printer’s front panel.
■ Use CentreWare Internet Serivces (IS) software.
To turn on/off the automatic printing of the Startup Page from the printer’s front panel:
1. With
Menus highlighted, press the OK key.
2. Scroll to
Printer Setup Menu using the Up Arrow or Down Arrow key and press the
OK key.
3. Scroll to
Startup Page. The end of the line also displays the setting (On or Off).
4. To change the setting, press the OK key.
To turn on/off the automatic printing of the Startup Page using CentreWare IS software:
1. From your printer’s Internet Services home page, click Properties.
2. On the left side of the Properties page in CentreWare IS, click Printer Defaults.
3. If desired, change the setting for Print Startup Page (under User Preferences on the Printer
Defaults page).
4. Click the Save Changes button on the bottom of the page.
To print the Starup Page at the front panel:
1. Scroll to the
Printable Pages Menu using the Down Arrow or Up Arrow key and press the
OK key.
2. Scroll to the
Print Startup Page using the Down Arrow or Up Arrow key and press the
OK key to print.
To Next Page
Loading...
Need help?
General