Fonts
Phaser® 7300 Color Printer 32
8. For Destination, select the download location: either the printer’s memory or the hard disk.
9. To download the fonts in the list, click the Send button.
Note
To remove downloaded fonts from the printer, follow steps 2 through 5, highlight the font in
the list under Fonts (in the printer’s dialog box), and then click the Remove button.
Downloading fonts from a PC
To list the fonts available on the printer, use the font download utility on the Xerox web site at:
www.xerox.com/officeprinting/support
.
Printing a sample of resident fonts
Listing the fonts from a Macintosh
Use the Apple Printer Utility to list the fonts available on the printer.
Note
In order to send the list of fonts to the printer with the Apple Printer Utility, you must disable
this on the printer’s front panel.
1. If you don’t already have the Apple Printer Utility on your computer, install it from the printer’s
CD-ROM.
2. Start the Apple Printer Utility by double-clicking the icon (in the PhaserTools folder on your
computer’s hard disk).
3. In the Printer Selector dialog box:
a. Under AppleTalk Zones, select your printer’s zone.
b. Under Printers, select your Phaser 7300 Color Printer.
c. Click Open Printer.
4. From the File menu, select Print Font Samples.
Listing the fonts from a PC
To list the fonts available on the printer, use the font download utility on the Xerox web site at
www.xerox.com/officeprinting/support.
To Next Page
Loading...
Need help?
General