Xerox Phaser 7300

Fonts
Phaser® 7300 Color Printer 33
Listing the fonts from your printer’s front panel
You can print both a PCL font list and a PostScript font list from the front panel:
1. On the front panel, with
Menus highlighted, press the OK key.
2. Scroll to
Printable Pages Menu by pressing the Up Arrow or Down Arrow key and press
the OK key.
3. Scroll to either
Print PostScript Font List or to Print PCL Font List and
press the OK key.
Listing the fonts from CentreWare IS
You can print font samples from CentreWare IS if you have a hard drive on your printer.
1. Enter the printer’s IP address in your browser to open CentreWare IS.
2. Click the Print tab.
3. Click Print Fonts to display the Print Font Samples screen.
4. Select either PostScript or PCL fonts. You can only select one at a time.
5. Click the button to start to print.