Xerox Phaser 8560 Brochure

Copyright © 2007 MCA Internet, LLC dba BERTL. 13 April 2007
All Rights Reserved. The license under which this document is made available and applicable law prohibit any reproduction or further transmission of any portion of this document. This
document may only be viewed electronically through the www.BERTL.com Web site and may not be stored in electronic or hard copy format. Any reproduction of trademarks is strictly
prohibited. BERTL accepts no responsibility for any inaccuracies or omissions contained in this document.
Page 9
May 2007
Xerox Phaser 8560
www.bertl.com
IMAGE QUALITY
BERTL evaulates the output of several “test targets” in
order to determine image quality. Following are
descriptions of key elements of image quality. Note the
numbered examples on each of the test targets shown in
the right column.
Office Color Image Quality
1. Density of Solid Areas - Better contrast; more vivid overall images
2. Line Work - Better production of lines and text
3. Halftones - Better production of photographic and screened images
4. Negative/Positive - Better production of fine detail
Photographic Color Image Quality
5. Fleshtones - Better production of portraits
6. Banding - Better solid and dithered fill
7. Low Contrast - Better production of dark images
8. Saturation - Better production of bright colors
9. Caste – Better color fidelity
10. Fine Detail – Better reproduction of fine details
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
Higher = Better
Black
Cyan
Yellow
Magenta
Office Color Image Quality
Resolution and Image Density
Print Resolution
Horizontal
Print Resolution
Vertical
Print Density
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5 = Best
Fleshtones Banding Low Contrast Saturation Caste Fine Detail
Printed Photo Image Quality
Photo Quality
Attribute
BERTL uses ImageExpert printer test targets for the evaluation of
printed image quality. BERLT technicians measure image density and
evaluate the device’s ability to product a full range of halftones and
various sizes of negative/positive text, dots and lines in each primary
printing color (CYMK).
BERTL uses synthetic (photographic) test images obtained from ISO
International Standard 12640--Graphic Technology—Prepress
digital data exhange—CYMK standard colur image data
(CYMK/SCID) in order to evaluate the ability to print photographic
images.
Image Quality
1 1
1 1
2
3
4
5
5
5
5
6
7
8
9
10
10
10
10
10
10
8

Xerox Phaser 8560 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (color, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	3 ppm
Print speed (color, normal quality, A4/US Letter)	30 ppm
Maximum internal memory	1 MB
Sound power level (standby)	33 dB
Sound pressure level (printing)	54 dB
Maximum duty cycle	85000 pages per month
Number of print cartridges	4
Page description languages	PCL 5c
Maximum input capacity	625 sheets
Paper tray 2 input capacity	525 sheets
Multi-Purpose tray input capacity	100 sheets
Power requirements	110 - 240 V, 50/60 Hz
Networking features	10/100BaseTX
Standard media sizes	140 x 216 mm - 216 x 356 mm
Power consumption (active)	230 W
Compatible operating systems	Linux, Mac OS X 10.2 +, Novell NetWare 3.x +, Windows 2000 +
Envelopes sizes	C5, DL
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Envelopes, Glossy paper, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv6
Sustainability certificates	ENERGY STAR
Power consumption (PowerSave)	43 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	406 x 533.4 x 368 mm