4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
5. Load paper into the tray with the print side face up.
• Load hole-punched paper with the holes to the left.
• Load label sheets in the tray face up.
• For 1-sided printing, load letterhead paper face up with the top of the paper toward the back
of the tray.
• For 2-sided printing, load letterhead and pre-printed paper face down with the top edge
feeding into the printer.
Note: Do not load paper above the maximum fill line. Overfilling can cause paper jams.
6. Adjust the length and width guides to fit the paper.
164
Xerox
®
VersaLink
®
C605 Color Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
