• For C5 envelopes, perform one of the following steps. If the envelopes wrinkle, try the other
option.
• Load envelopes with the print-side up, flaps open and down, and the bottom of the
envelope going into the printer.
• Load envelopes with the print-side up, flaps closed and down, and short edge going into
the printer.
Note: For envelopes to print correctly, when you load envelopes with the flaps
open, in the print driver, set the orientation as needed. To flip the images, in
the print driver, select Rotate Image 180 Degrees.
5. Adjust the width guides until they touch the edges of the envelopes.
6. If the Tray Mode is set to Fully Adjustable, the printer prompts you to set the paper size, type,
and color.
a. If the paper size, type, and color are correct, touch OK.
b. If the paper size, type, or color are incorrect, change the settings.
• To select a different size, touch the current size setting, then from the list, select the size.
• To select a paper type, touch the current paper type, then from the list, select Envelope.
• To select an envelope color, touch the current paper color, then from the list, select an
envelope color.
c. To save the settings, touch OK.
Xerox
®
VersaLink
®
C605 Color Multifunction Printer
User Guide
173
Paper and Media
To Next Page
Loading...
