3. Move the width guides to the edges of the tray.
4. Load sheet-labels in the Bypass Tray, face up, with the top edge of the page feeding into the
printer first.
5. Adjust the width guides until they touch the edges of the paper.
6. The printer prompts you to verify the size, type and color of the label sheets.
a. If the size, type and color are correct, touch OK.
b. If the size, type or color are incorrect, change the settings.
• To select a different size, touch the current size setting, then from the list, select a size.
• To select the type, touch the current paper type, then from the list, select Labels.
• To select the color, touch the current paper color, then from the list, select a color.
c. To save the settings, touch OK.
Xerox
®
VersaLink
®
C605 Color Multifunction Printer
User Guide
177
Paper and Media
To Next Page
Loading...
