3. Move the width guides to the edges of the tray.
Note:
• To prevent jams, ensure that the leading edge of the envelopes are flat or have
only a slight upward curl, less than 5 mm (.19 in.), before loading into the tray. If
the edge is curled or swollen, fold it over to decurl. The length of the curl must be
within 8–10 mm (.31–.39 in.). Downward curl at the leading edge of envelopes is
not acceptable and can cause a jam or misfeed.
• Load envelopes up to 16.5 mm (.65 in.) in height. This is approximately 10–20
envelopes, depending on brand, size, and texture.
• If you do not load envelopes in the Bypass Tray right after you have removed the
envelopes from the packaging, the envelopes can bulge. To avoid jams, flatten the
envelopes before loading them into the tray.
4. To load the envelopes, select an option:
168
Xerox
®
VersaLink
®
C605 Color Multifunction Printer
User Guide
Paper and Media
To Next Page
Loading...
Need help?
General
