Symptom
Probable Causes Solutions
White lines or streaks running
through only one color.
Something is blocking the lens for
the affected color.
Clean the lens for the affected
color. For details, refer to Cleaning
the LED Lenses.
White line or lines running through
all colors.
Paper or debris is dragging the
bottom of the transfer belt.
• Remove the paper or debris
from the printer.
• Replace the Transfer Belt,
which is included in the
Maintenance Kit.
• For assistance, go to the
Xerox
®
Support website at
www.xerox.com/office/
VLC605support.
Slanted printing.
The paper guides in the trays are
not set correctly.
Reset the paper tray guides. For
details, refer to Loading Paper.
232
Xerox
®
VersaLink
®
C605 Color Multifunction Printer
User Guide
Troubleshooting
To Next Page
Loading...
Need help?
General
