Xerox Versant 2100 - Page 22

Bypass (Tray 5)
The Bypass Tray, also called Tray 5, is an optional feeding device that is installed on top
of the Oversized High Capacity Feeder.
Important
When the system configuration includes only one OHCF (Trays 6 and 7), then the Bypass
Tray is installed on top of it. If the system configuration includes an second, chained
OHCF (Trays 8 and 9), then the Bypass Tray is installed on top of the second OHCF (Trays
8 and 9).
The Bypass Tray accommodates a weight range of 52 to 300 gsm and media size of
3.86 x 5.75 inches (98 x 146 mm) to 13 x 19.2 inches (330.2 x 488 mm). The Bypass
Tray holds a maximum of 280 sheets of 20 lb. / 75 gsm plain paper.
The Bypass Tray accepts envelopes, postcards and transparencies.
Finishing Devices
Offset Catch Tray (OCT)
The Offset Catch Tray installed at the end of the print engine receives the completed
print job. Output print sheets can be offset for easy separation. The maximum capacity
of the tray is 500 sheets of 24 lb. (90 gsm) paper.
Interface Module
Important
The Interface Module is required with any inline finishing devices installed with the
system.
Xerox
®
Versant
®
2100 Press1-10
User Guide
Product Overview