Feeding and Finishing Devices
Available with your press is a variety of optional feeding and finishing devices. These
devices are briefly introduced on the following pages. Refer to the sections at the end
of this guide for specific information on each feeder or finisher.
Feeding Devices
Oversized High Capacity Feeder (OHCF / Trays 6 and 7)
Tip
The Oversized High Capacity Feeder (OHCF / Trays 6 and 7) are part of the standard
press configuration.
The Oversized High Capacity Feeder (OHCF) contains two trays, Trays 6 and 7 and feeds
a variety of stock sizes, including standard, heavyweight, and oversized stocks up to 13
x 19.2 in. / 330 x 488 mm in size and weighing between 52 gsm and 350 gsm. Each tray
holds 2,000 sheets of coated and uncoated stock.
Chained Oversized High Capacity Feeder (OHCF / Trays 8 and 9)
A second, chained Oversized High Capacity Feeder (OHCF) may be added to the system
to extend the paper capacities by providing two additional trays. This second, chained
OHCF is referred to as Trays 8 and 9, and it feeds a variety of stock sizes, including
standard, heavyweight, and oversized stocks up to 13 x 19.2 in. / 330 x 488 mm in size
and weighing between 52 gsm and 350 gsm. Each tray holds 2,000 sheets of coated
and uncoated stock.
1-9Xerox
®
Versant
®
2100 Press
User Guide
Product Overview
To Next Page
Loading...
