Xerox Versant 2100 - Throughput; Productivity Information

• Stock types include transparencies, heavyweight, coated and uncoated, predrilled,
and tabs
• Loading paper Long Edge Feed (LEF) / portrait or Short Edge Feed (SEF) / landscape
(dependent on the actual paper size)
• Auto size detection capability
• Automatically adjusts the tray position in the front and back based on the paper size;
this is done once the tray is closed
Oversized High Capacity Feeder (Trays 6 and 7)
The specifications for each tray are:
• Maximum of 2,000 sheets of 24 lb. (90 gsm) uncoated paper; 2,100 sheets of 82 gsm
and 2,300 sheets of 64 gsm
• Paper weight range of 52 to 350 gsm
• Stock types include transparencies, heavyweight, coated and uncoated, predrilled,
and tabs. Transparencies perform best when printed from Trays 6 and 7
• If using the optional Postcard bracket, minimum size is 4 x 6 inches / 101.6 x 152.4
mm
Note
For more information on the optional Postcard bracket, refer to the Paper and Media
section of this guide.
Bypass (Tray 5)
• Maximum of 250 sheets of 24 lb. (90 gsm) uncoated paper; 28 lb. to 110 lb. cover
(106-300 gsm) coated stock
• Paper weight range of 52 gsm (uncoated) to 300 gsm (coated)
• Stock types include transparencies, heavyweight, coated and uncoated, predrilled,
and tabs
Throughput / Productivity Information
Process and print speed is based on simplex (1-Sided) / duplex (2-Sided) mode, paper
type, paper weight, paper size and feeding tray.
Table 1: Trays 1, 2 and 3 in LEF Feed Direction
Prints Per MinuteSimplex / DuplexPaper WeightPaper Type
100 ppm / 50 ppmSimplex / Duplex64 to 256 gsm8.5 x 11 / A4 uncoated
and coated
40 ppmSimplex106 to 256 gsm8.5 x 11 / A4 Labels
and Transparencies
3-3Xerox
®
Versant
®
2100 Press
User Guide
Technical Specifications