User Guide 3-1
3. Scanner Setup
1. Remove the scanner from the shipping box, verify all parts listed on page 2-1 are in the box.
We recommend that you keep the original packing materials in case you need them later.
2. Always have at least two people carry the scanner, lifting the scanner up from underneath.
3. Use a desk or table that can support the weight of the scanner, do not place the scanner on a
cloth covered surface.
4. Place the scanner on a level surface near the computer.
5. Remove any shipping tape from the scanner as indicated in the following illustration(s).
The illustrations are for example purposes only. Your scanner’s packaging may vary slightly.
6. Release the tray door to open the input tray. Pull the output tray from the scanner.
To Next Page
Loading...
Need help?
General
