Xerox
®
W130 / W110 Scanner Scanner Options, Maintenance and Troubleshooting
6-8 User Guide
Cleaning the ADF Sensors
1. Pull on the scanner cover release and lift the lid to open the scanner.
2. The following illustration shows the location of the sensors in the scanner.
3. Using a clean, dry cotton swab, brush away any dust on the double feed detection sensors.
Replacing the Rollers
When replacing the rollers described in this section, you should replace all of the rollers at the
same time. Do not replace just one roller and not the other. When you are finished replacing the
roller, reset the roller count as described in the page 6-2.
To Next Page
Loading...
