13
Quick Use Guide
Simple Scan to Mailbox
Some models do not support this feature, and some models need to have
optional kits installed in order to use this feature. For details, contact your
System Administrator.
1. Load the documents.
2. Select [Scan to Mailbox].
3. Select the appropriate Mailbox.
4. Select the Features.
If you need to change the scan settings, select the [General Settings],
[Advanced Settings], [Layout Adjustment], or [Filing Options] tabs, then select
the desired settings.
5. Press the <Start> button.
Once you have pressed the <Start> button, each document is scanned.
6. Access the scanned document in the Mailbox.
Access the electronic version of the document in the specified Mailbox at the
machine.
To Next Page
Loading...
