Xerox WORKCENTRE 5735 - User Account and Passcode Security; User Account and Password Policies; Recommended Passcode Changes; Job Operation Rights and Authentication

To send a fax to a single recipient:
1. If necessary, press the [Services Home] button on the Control Panel, and then
select the [Fax] tab on the Touch Screen to display the Fax options.
2. Using the alphanumeric keypad, enter the fax phone number, and then press the
[Start] button to send the fax.
To send a fax using the Address Book:
1. If necessary, press the [Services Home] button on the Control Panel, and then
select the [Fax] tab on the Touch Screen to display the Fax options.
2. Select the [Address Book] button.
3. Select the [Individuals] option from the pull-down menu.
4. Select the required speed dial from the list displayed, and then select the [Add to
Recipients] option from the pop-up menu.
5. Repeat step 4 to enter additional individual fax.
6. When all the fax numbers have been entered, select the [Close] button.
7. Select any required features for your fax job.
8. Press the [Start] button on the Control Panel to scan the originals and process
the fax job.
How to Scan to E-mail
1. Load the original(s) face-up in the Duplex Automatic Document Feeder (DADF),
or place a single original face-down on the Document Glass.
2. Press the [Services Home] button on the Control Panel.
3. Select [Email] on the Touch Screen.
4. Add a new recipient’s email address
5. Press [Add]
6. Select any other required options from the Email, Advanced Settings, Layout
Adjustment, Email Options or Job Assembly tabs.
7. Press the [Start] button on the Control Panel.