Xerox WorkCentre 5875 Getting Started Guide

Getting Started
WorkCentre
®
5845/5855/5865/5875/5890 71
Getting Started Guide
Maintenance and Consumables
Identifying the Replaceable Units
There are several consumables on the device that need replenishing or replacing, such as paper, staples,
and customer replaceable units.
1. Toner Cartridge
2. Xerographic Module
3. Fuser Module
4. Waste Toner Bottle
5. Ozone Filter
The device will display a message on the touch screen when any of the units need to be re-ordered. This
message is a warning that the unit is nearing the end of its life. Only replace the unit when a message
actually instructs you to do so.
WARNING: When replacing consumables do NOT remove the covers or guards that are fastened
with screws. You cannot maintain or service any of the parts that are behind these covers and
guards. Do NOT attempt any maintenance procedure that is NOT specifically described in the doc-
umentation supplied with your device.
Cleaning the Document Glass and Constant Velocity Transport Glass
To ensure optimum print quality at all times, regularly clean the glass areas of your device. This helps
avoid output with streaks, smears and other marks that may transfer from the glass area when scanning
documents.

Xerox WorkCentre 5875 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Scan Resolution	600 x 600 dpi
Memory (Standard)	2 GB
Hard Drive	160 GB
Print Speed (Black)	75 pages per minute
Maximum Paper Capacity	4, 700 sheets
Scan Speed (Black)	200 images per minute
Scan Speed (Color)	200 images per minute
Connectivity	USB 2.0, 10/100/1000Base-T Ethernet
Control Panel	Touchscreen
Processor	1.2 GHz
Operating System Compatibility	Windows, Mac, Linux