Xerox XC351 User Manual

Safety
Notes
Your copier and supplies
have been designed
and tested to
meet
strict
safety requirements.
These include
safety agency examination and
approval,
and compliance to established environmental
standards.
Please
read
the
following instructions carefully before operating
the copier and
refer
to them
as needed to ensure the continued
safe operation of
your
coprer.
Follow allwarnings and
instructions marked
on or supplied with
the
product.
Symbology,A= High Voltag",
A=
Heated
Surface.
Unplug this copier
from the wall outlet before
cleaning. Always use
materials specifically designated
for
this copier.
Use of other materials
may result in
poor performance
and
could create a hazardous
situation.
Do not use aerosol cleaners.
Follow
the
instructions
in
this User Guide for
proper
cleaning
methods.
Never use supplies or cleaning materials for
purposes
other than what
they were intended. Keep all supplies
and materials out
of
reach
of
children.
Do noluse this copier near water, wet locations,
or outdoors.
Do not
place
this copier on an unstable
cafi, stand, or table. The
copier
may fall, causing
personal
injury
or serious
damage to the
copier.
This
product
is equipped with a 3-wire
grounding
type
plug
(e.9.,
a
plug
having
a third
grounding pin).
This
plug
willfit only into
a
grounding-type
power
outlet.
This is
a safety
feature. To
avoid risk
of electric
shock,
contact
your
electrician to
replace
the receptacle if
you
are
unable to
insert
the
plug
into
the outlet. Never use a
grounding
adapter
plug
to connect
the copier to a
power
source receptacle
that lacks a
ground
connection
terminal.
This
copier should be operated from
the type of
power
source indicated
on the marking label. lf
you
are
not
sure of the
type of
power
available,
consult
your
local
power
company.

Xerox XC351 Specifications

General

Brand	Xerox
Model	XC351
Category	Copier
Language	English