Safety
Nofes
Do not
allow
anything
to rest on the
power
cord.
Do not locate
the copier
where
persons
will step on the cord.
The
power
supply
cord
is
the disconnect device
for
this equipment.
Insure that
installation is near the outlet and
is
easily accessible.
Your machine
is
equipped
with an energy saving device to conserve
power
when the machine
is not in use. The machine may be left on
continuously.
Slots and
Openings
in
the cabinet and
in
the
back and sides of
the
copier are
provided
for ventilation.
To
ensure
reliable
operation of the
copier and to
protect
it from overheating, these openings
must not
be
blocked or
covered. The cooier should
never
be
located near or
over a
radiator or
heat register. This copier should not be
placed
in a built-in
installation unless
proper
ventilation is
provided.
Never
push
objects of any
kind into the slots of the copier as they may
touch dangerous
voltage
points
or shorl out
parts
which
could
result in a
fire
or electric shock.
Never spill
liquid
of
any kind on the copier.
Never remove covers or
guards
that require
a tool
for removal. There are
no
casual
operator serviceable areas
within
these covers.
Never defeat interlock switches.
Machines
are designed to
restrict
operator access to unsafe areas. Covers,
guards,
and
interlock
switches
are
provided
to ensure that the machine will not operate with covers
ooened.
Use of an extension
cord with this copier is not recommended
or
authorized. Users should check
building
codes and
insurance
requirements if an extension cord
is
to be used. Ensure that the total
ampere ratings of the
products plugged
into
the extension cord do not
exceed the extension cord ampere
rating.
Also,
make
sure that the total
amperage of all
products plugged
into
the wall outlet does not exceed
the
outlet
rating
To Next Page
Loading...
Need help?
General
