XFX GeForce 9300 - Page 22

XFX GeForce 9300 Motherboard
16
Note: To enable all six SATA ports, AHCI must be enabled in the “RAID
Mode” menu in the BIOS. Setting IDE in “RAID Mode” menu will only enable
the first four SATA ports.
On Chip SATA Controller [Enabled]
RAID MODE [AHCI]


 AHCI Configuration [Press Enter]
Item Help
Disable: Displays
normal POST messages.
Enable: Displays OEM
Logo instead of POST
messages.








:Move Enter:Select +/-/:Value F10:Save ESC: Exit F1: Help
F8:Fail-Safe Defaults F6:Optimized Defaults
On Chip ATA Devices
All manuals and user guides at all-guides.com