Xhorse KEY TOOL PLUS - EEPROM and module programming

Fig.7.3.1 Fig.7.4.1
7.3 BMW FRM module programming(Solder-Free)
Steps：
① Connect the device to BMW adapter(Optional), then clip the adapter to BMW FRM module as
shown in Fig. 7.3.1.
7.4 LANDROVER RFA programming(Solder-Free)
Steps：
① Connect the device to Land Rover RFA adapter(Optional), then clip the adapter to Land Rover
RFA module as shown in Fig. 7.4.1.
② Execute reading range and data, then write the repaired data.
② Execute unlock, reading and other operations.
PROG
27 28
PROG
www.vvdishop.com