7.5 PORSCHE BCM programming(Solder-Free)
Steps：
① Connect the device to Porsche BCM adapter(Optional), then clip the adaptor to Porsche BCM
module as shown in Fig. 7.5.1.
Fig.7.5.1
② Execute backup reading and other operations.
Fig.8.1.1
8 Immo Data Tool
For some cars, key programming and other settings can't be finished via OBD port due
to its immobilizer system design. On this occasion, File Make Key can be used to
generate or add keys for them. The primary principle of File Make Key is to generate
transponder via reading related transponder data of the car immo module directly.
Thus the car can be started without programming.
8.1 Car models support list
KEY TOOL PLUS supports File Make Key function of common cars and motorcycles. The
support list is as follows in Fig. 8.1.1.
Immo Data Tool
29 30
PROG
To Next Page
Loading...
