5. Connecting the power supply.
As shown in the figure, run the power cord along the top of the windshield, down the A-pillar, and around the glove compartment, so that the power
connector is near the cigarette lighter. Connect the power cord to the car charger, then plug the charger into the cigarette lighter socket.
Note:
• Use the included crowbar to hide the power cord underneath the vehicle’s headliner and rubber seal along the A-pillar.
• Depending on the vehicle, the cigarette lighter socket may be located in a different position. The above figure is for reference only.
6. Adjusting the dashcam angle.
Turn on the dashcam and adjust the camera angle based on the preview screen to ensure that the camera is facing the front of the vehicle.
Accessories (optional)
The rear recording function of this product needs to be used with the rear cameras. Scan the QR code below to obtain the operation guide for rear
camera.
https://help.70mai.asia/1472.html
Note: To avoide the rear camera malfunction due to device incompatibility, it is recommended to use a rear camera from the 70mai brand.
Download 70mai App
This product may be used in conjunction with the 70mai App. Please search for “70mai” in the App Store or scan the following QR code to download and
install the App.
https://www.70mai.com/en/download/?souce=QrcodeVue
Note: Android 4.4 & iOS 9.0 or above is required to connect to the dash cam’s Wi-Fi hotspot with a mobile phone.
Online Guide
Scan the below QR code to access the online guide. The guide provides detailed product information including descriptions of functions. Please carefully
read this guide before use in order to avoid damage due to incorrect use.
To Next Page
Loading...
Need help?
General
