https://help.70mai.asia/1467.html
Packing list
1. 70mai Dash Cam Pro Plus+ ×1
2. Mount ×1
3. Power cord×1
4. Dual USB Car Charger×1
5. Wiring crowbar×1
6. Electrostatic Sticker × 2
7. Adhesive Sticker × 2 (with 1 pre-applied to the mount)
8. User manual×1
Memory Card Instructions
A memory card (sold separately) must be installed in the dashcam before use.
The dash cam supports standard MicroSD cards. Please use memory cards with a capacity of 16 GB ~ 128 GB and a speed rating of Class 10 or
higher.
The default file partition format of the memory card may be inconsistent with the format supported by the dashcam. When inserting the memory card
for the first time, please format it in the dash came before use. Formatting the memory card will delete all files on the card. Please back up
important data to another device beforehand.
The memory card may become damaged or deteriorate after repeated cycles of overwriting, and this may affect its ability to save video and image
files. If this occurs, immediately replace it with a new memory card.
Please use a high-quality memory card purchased from a reputable vendor. Inferior memory cards may have issues such as actual reading/writing
speeds that do not match the stated speeds, and an actual storage capacity that does not match the stated storage capacity. We shall not be held
liable for lost or damaged videos caused by the use of a low-quality memory card.
In order to avoid reading and writing speeds decreasing after prolonged use, it is recommended to format the memory card in the dashcam every
two weeks.
Do not insert or remove a memory card while the dashcam is turned on.
Precautions
Before using this dash cam, please read all the precautions and the online guide to ensure correct and safe use.
This dash cam is intended to assist drivers with the purpose of recording the environment outside the vehicle. The dash cam does not guarantee
the user’s driving safety. We shall not be held liable for any accident, damage, or loss of information caused by operating the dash cam while
driving.
Due to differences in vehicle conditions, driving style, driving environment, etc., some functions may not work properly. A power failure, usage in
environments outside the normal operating temperature or humidity range, a collision, or a damaged memory card may cause the dash cam to
function abnormally. There is no guarantee that this dash cam will function normally under all circumstances. Videos recorded by this dash cam are
for reference only.
Please install this dash cam correctly, and do not block the driver’s line of sight, nor block the vehicle’s airbag, in order to avoid product failure or
personal injury.
Please use the included car charger, power cord, and other accessories in order to avoid product failure due to non-conformance. We shall not be
held liable for any loss or damage caused by the use of a nongenuine car charger or power cord.
If the battery becomes deformed, swollen, or starts leaking during use or storage, stop using the dash cam immediately in order to avoid safety
issues, and contact after-sales service.
Please keep this dash cam away from any strong magnetic fields, as they may cause damage to the dash cam.
Do not use this dash cam in environments with temperatures over 60°C or below -10°C.
Please only use this dash cam within the scope permitted by law.
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
To Next Page
Loading...
